Edit: ideally wifi cameras that I can solar power.
Looking to replace my Arlo cameras with something self-hostable. Arlo lets you store on a USB stick, but there’s no way to get out from under their cloud, which gets more expensive all the time.
You must log in or # to comment.
Most cameras are self hosted but they are not marketed to consumers because they require running cables to them either for power and/or data.
Reolink camera with onvif so support can be connected to Frigate or Shinobi.
Hikvison and Dahua are common Chinese brands that have lots of options across lots of prices points but are treated as insecure or hostile iot devices required closed networks.
Costco often has camera and NVR packages that are passable.
Whenever possible make sure any camera you get is onvif so you can use it with any NVR or software.
You can use pretty much any camera with ZoneMinder as long as it supports ONVIF or RTSP and has the right connectivity and power inputs for you. I did something similar with some cheap TP-link cameras with pretty good results. With motion activated recording, I have just shy of 12 month of recordings stored on a 500G SSD.
Frigate is amazing, that’s what I’d recommend. I’m using a 5MP Amcrest camera, works very well. The dev doesn’t recommend Reolink.
Acronyms, initialisms, abbreviations, contractions, and other phrases which expand to something larger, that I’ve seen in this thread:
Fewer Letters More Letters AP WiFi Access Point IP Internet Protocol IoT Internet of Things for device controllers NAS Network-Attached Storage NVR Network Video Recorder (generally for CCTV) PoE Power over Ethernet SSD Solid State Drive mass storage SSH Secure Shell for remote terminal access Unifi Ubiquiti WiFi hardware brand
9 acronyms in this thread; the most compressed thread commented on today has 11 acronyms.
[Thread #289 for this sub, first seen 18th Nov 2023, 23:15] [FAQ] [Full list] [Contact] [Source code]
I use Reolink cams with BlueIris software. None of it has access to the internet. Works fine.
Can vouch for this. Been using a bunch of Reolink cameras with BI for years. Be careful with Reolink, though. Some cameras work fine and some don’t at all, unless you use some middleman software, which is still hit or miss. Ran into this recently with a camera I got for my garage.
Edit: The Reolink Lumus line is NOT compatible. They don’t broadcast rtsp.
Reolink looks like a solid answer, thanks.
Many selfhosted NVRs have been suggested. Personally ive tried:
iSpy
Frigate
Zoneminder
Shinobi
Ended up settling on zoneminder at this stage.
For cameras themselves i just want to point out the OpenIPC project - opensource firmware if youre technically inclined
Edit: I’m hesitant to recomment OpenIPC now since the main streamer is closed source. Thingino is fully open and developed by some of the devs who didn’t agree with the closed source portion
https://frigate.video/ works with IP cameras
UniFi
I personally recommend against UniFi for security now. Their software just isn’t great anymore, and you can’t really “selfhost” the protect. You have to have one of their proprietary boxes hosting the protect software. I’m not 100% against that - but I was not aware of that when I bought the first camera and had to buy the box.
As for the software, it’s honestly just buggy and laggy. I’m in their system now, but if I could do it all again I’d look at others.
I’m somewhat stuck on Unifi for wifi APs and Routers, because all the other consumer-grade devices can’t handle the number of small IoT devices I’ve got. Netgear and Asus just lose connections with ESP devices and refuse to let them connect after about a dozen. The commercial grade stuff, in addition to being too expensive, is all rack mounted, high power draw and noisy af.
Aside from the fact that my stuff seems stable on the Ubiquiti hardware, I hate the products. The interface is terrible, Unifi insists on hiding the advanced networking behind a halfass gui, the SSH console lacks half the features of even that terrible gui, and every time i try to create a new routed network, the wifi devices stop connecting.
I use unifi for wifi because honestly I like the dashboard.
But… for anything layer 3, I’m using MikroTik. It’s extremely powerful without actually running your own router, and many are Poe as well. I’m running a RB5009 which is overkill for me.
I chose RB5009 because it runs DoH, ZeroTier, sub interfaces, it’s rack mountable, passively cooled, poe capable, and can handle up to 2.5gb symmetrical. I just wish they had 2 x SFPs so I can use a full 10gb WAN
Nah, their software is so infuriating to work with. Even when an SSD it falls to load video clips. Often I have to restart unifi protect on the console or even ssh into it to do and apt update/upgrade to get it working again.
Self hosted might be a little better, but I’m not holding my breath.
Frigate + reolink is a great combo.
You can use Zoneminder with pretty much any cameras that work with Linux.
If you’re looking for something more or less in the same footprint, I understand those cheap Wyze cameras can be used. There are alternative firmwares available that can be flashed to them to open up the rtsp stream to whatever self-hosted recorder you’d like. Haven’t tried it, but have heard it mentioned on the Self Hosted podcast.
This might not be 100% what you’re looking for but I am running Reolink cameras and a Qnap NAS with QVR PRO. The reolink cameras are accessible through IP and some protocol I can’t remember right now. So you might be able to get them to work with your setup
Does Ubiquiti qualify?
They do but are a poor value next to most other options.
I would review https://docs.frigate.video/frigate/hardware
Not sure about wifi cameras, I have a mix of Trendnet and Hikivision POE, sitting on a Vlan with no internet access. For the software I use Blue Iris. Where I have a need for cameras I have only a Windows server and I have found this software to be the best for me.
