Removed by mod

You know what else is small brain thinking? INCORRECTLY being pedantic about word choices. That’s the part that pisses me off the most with these apologists. They are literally incorrecting people using words properly.

I cited the definitions of “murder” above. Explain to me, with reference to these definitions, how the term “murder” doesn’t apply. (Hint: this is not possible.)

Removed by mod

I quoted the dictionary definition of murder above. Can you point to the part that says governments can’t murder?

Removed by mod

Where, precisely (and be detailed, with a map) do you think Hamas should be locating itself in Gaza that doesn’t have civilians all around them?

You go get a map of Gaza and point it out. I’ll wait.

You’d think that it would be considered more brutal given that the people committing the killings aren’t even exposing themselves to a threat.

Cowards, in a word.

Removed by mod

Removed by mod

I arrived in China 2001.

I experienced the harshest and largest lockdown in all of history: Wuhan, January 23rd, 2020. A real lockdown, not the cosplay bullshit you experienced outside of China. (Yes, this is me saying you’ve never fucking set foot in the country.)

The rest you’re just flat-out lying about. Sorry, Sparky. Did pet killings happen? Yes. They were not the mass shit that the press you’re so obviously reciting acts like they were. Did some doors get welded? Yes. But nowhere near you and, again, nowhere near in the masses the press you’re basing your lies on made it seem like. The local salaries are garbage iff you’re a fuckwit sitting in the west applying western prices to Chinese salaries. (Which, naturally, you are, good little fuckwit liar that you are.) And you’ve changed your tune from 14 hours to 12 hours really fucking quickly there, Sparky, not to mention using the proper slang only after I gave it to you.

So yeah, you’re just a west-dwelling fuckwit lying about being here. Go toddle off in your China Watcher corners and play with the rest of the intellectual children you belong with. There’s a good boy.

Removed by mod

Not trolling. Just:

• showing how clever optimizers can get these days
• introducing a cool web site
• highlighting the importance of occasionally peeking under the hood to spot gross inefficiencies

I mean it could hurt:

cube:
        push    {r4, r5, r6, r7, r8, r9, r10, fp}
        sub     sp, sp, #112
        add     r7, sp, #0
        str     r0, [r7, #92]
        mov     r3, sp
        mov     ip, r3
        ldr     r1, [r7, #92]
        ldr     r0, [r7, #92]
        ldr     r6, [r7, #92]
        subs    r3, r1, #1
        str     r3, [r7, #108]
        mov     r2, r1
        movs    r3, #0
        mov     r4, r2
        mov     r5, r3
        mov     r2, #0
        mov     r3, #0
        lsls    r3, r5, #3
        orr     r3, r3, r4, lsr #29
        lsls    r2, r4, #3
        subs    r3, r0, #1
        str     r3, [r7, #104]
        mov     r2, r1
        movs    r3, #0
        str     r2, [r7, #80]
        str     r3, [r7, #84]
        mov     r2, r0
        movs    r3, #0
        str     r2, [r7, #64]
        str     r3, [r7, #68]
        ldrd    r4, [r7, #80]
        mov     r3, r5
        ldr     r2, [r7, #64]
        mul     r2, r2, r3
        ldr     r3, [r7, #68]
        strd    r4, [r7, #80]
        ldr     r4, [r7, #80]
        mul     r3, r4, r3
        add     r3, r3, r2
        ldr     r2, [r7, #80]
        ldr     r4, [r7, #64]
        umull   r8, r9, r2, r4
        add     r3, r3, r9
        mov     r9, r3
        mov     r2, #0
        mov     r3, #0
        lsl     r3, r9, #3
        orr     r3, r3, r8, lsr #29
        lsl     r2, r8, #3
        subs    r3, r6, #1
        str     r3, [r7, #100]
        mov     r2, r1
        movs    r3, #0
        str     r2, [r7, #32]
        str     r3, [r7, #36]
        mov     r2, r0
        movs    r3, #0
        str     r2, [r7, #72]
        str     r3, [r7, #76]
        ldrd    r4, [r7, #32]
        mov     r3, r5
        ldrd    r8, [r7, #72]
        mov     r2, r8
        mul     r2, r2, r3
        strd    r8, [r7, #72]
        ldr     r3, [r7, #76]
        mov     r8, r4
        mov     r9, r5
        mov     r4, r8
        mul     r3, r4, r3
        add     r3, r3, r2
        mov     r2, r8
        ldr     r4, [r7, #72]
        umull   r10, fp, r2, r4
        add     r3, r3, fp
        mov     fp, r3
        mov     r2, r6
        movs    r3, #0
        str     r2, [r7, #24]
        str     r3, [r7, #28]
        ldrd    r4, [r7, #24]
        mov     r3, r4
        mul     r2, r3, fp
        mov     r3, r5
        mul     r3, r10, r3
        add     r3, r3, r2
        mov     r2, r4
        umull   r4, r2, r10, r2
        str     r2, [r7, #60]
        mov     r2, r4
        str     r2, [r7, #56]
        ldr     r2, [r7, #60]
        add     r3, r3, r2
        str     r3, [r7, #60]
        mov     r2, #0
        mov     r3, #0
        ldrd    r8, [r7, #56]
        mov     r4, r9
        lsls    r3, r4, #3
        mov     r4, r8
        orr     r3, r3, r4, lsr #29
        mov     r4, r8
        lsls    r2, r4, #3
        mov     r2, r1
        movs    r3, #0
        str     r2, [r7, #16]
        str     r3, [r7, #20]
        mov     r2, r0
        movs    r3, #0
        str     r2, [r7, #8]
        str     r3, [r7, #12]
        ldrd    r8, [r7, #16]
        mov     r3, r9
        ldrd    r10, [r7, #8]
        mov     r2, r10
        mul     r2, r2, r3
        mov     r3, fp
        mov     r4, r8
        mul     r3, r4, r3
        add     r3, r3, r2
        mov     r2, r8
        mov     r4, r10
        umull   r4, r2, r2, r4
        str     r2, [r7, #52]
        mov     r2, r4
        str     r2, [r7, #48]
        ldr     r2, [r7, #52]
        add     r3, r3, r2
        str     r3, [r7, #52]
        mov     r2, r6
        movs    r3, #0
        str     r2, [r7]
        str     r3, [r7, #4]
        ldrd    r8, [r7, #48]
        mov     r3, r9
        ldrd    r10, [r7]
        mov     r2, r10
        mul     r2, r2, r3
        mov     r3, fp
        mov     r4, r8
        mul     r3, r4, r3
        add     r3, r3, r2
        mov     r2, r8
        mov     r4, r10
        umull   r4, r2, r2, r4
        str     r2, [r7, #44]
        mov     r2, r4
        str     r2, [r7, #40]
        ldr     r2, [r7, #44]
        add     r3, r3, r2
        str     r3, [r7, #44]
        mov     r2, #0
        mov     r3, #0
        ldrd    r8, [r7, #40]
        mov     r4, r9
        lsls    r3, r4, #3
        mov     r4, r8
        orr     r3, r3, r4, lsr #29
        mov     r4, r8
        lsls    r2, r4, #3
        mov     r3, r1
        mov     r2, r0
        mul     r3, r2, r3
        mov     r2, r6
        mul     r3, r2, r3
        adds    r3, r3, #7
        lsrs    r3, r3, #3
        lsls    r3, r3, #3
        sub     sp, sp, r3
        mov     r3, sp
        str     r3, [r7, #96]
        mov     r3, r1
        mov     r2, r0
        mul     r3, r2, r3
        mov     r2, r6
        mul     r3, r2, r3
        mov     sp, ip
        mov     r0, r3
        adds    r7, r7, #112
        mov     sp, r7
        pop     {r4, r5, r6, r7, r8, r9, r10, fp}
        bx      lr

Multiplication hurts? 😲

cube:
        mul     r3, r0, r0
        mul     r0, r3, r0
        bx      lr

Oh well. I can’t cater to the stupid and the insane. I’ll live where I don’t need a car to get basic amenities of life and use the money I save to live grandly. They can spend the money, time, and health on living with unnecessary vehicles until they die out.

Build fifteen minute cities, in short. I live in one, for all practical purposes, and it’s GRAND!

Yes. Six of them. Only one of which exceeds 150km/h in speed and none of which exceeds 30km in length. So impressive and totally better than high speed rail that routinely exceeds 250km/h over distances measured in hundreds to thousands of km.

Dude, I live in China. I’ve taken the Shanghai maglev a few times. It’s a white elephant. It only exists because it’s “face” for them to have it. It’s heavily subsidized and is still ridiculously expensive (40RMB cheapest one-way ticket, with peak price of 100 one-way).

Perhaps you should have read a bit further along in your little article here:

Despite over a century of research and development, there are only six operational maglev trains today — three in China, two in South Korea, and one in Japan.

Of these:

• The Shanghai one operates at 300km/h most of the time. It’s about 30km long.
• The Changsha one runs at 140km/h over a length of about 19km.
• The Beijing one runs at 100km/h over a distance of about 10km.
• The Linimo one runs at 100km/h over about 9km.
• The Incheon one runs at 80km/h over about 6km.

(I can’t find a reference to a second commercial maglev in South Korea, so if you find it, you can place it in that list.)

For reference, the Jinghu high-speed railway between Beijing and Shanghai operates at 350km/h cruising speed over a length of more than 1300km. And 250km/h rail lines are now common like borscht here in China.

So, yes maglev trains exist, but this does not make them economically viable. The evidence shows that most of them are slow (even by traditional rail standards, not to mention HSR), expensive, only run short distances, and in the case of the single high speed one runs only because it is heavily subsidized (despite the ludicrously overpriced tickets).

So read¹ these² and maybe³ you’ll⁴ learn⁵ something⁶.

¹ https://en.wikipedia.org/wiki/Maglev

² https://en.wikipedia.org/wiki/Shanghai_maglev_train

³ https://en.wikipedia.org/wiki/Incheon_Airport_Maglev

⁴ https://en.m.wikipedia.org/wiki/Linimo

⁵ https://en.wikipedia.org/wiki/Line_S1_(Beijing_Subway)

⁶ https://en.wikipedia.org/wiki/Changsha_Maglev_Express

Maglevs are economically unviable in the absence of room temperature superconductors. So being in the “sci-fi” camp isn’t really the flex you think it is.