This kinda sounds stupid, but everyone I’ve looked up say “grab CPU by the sides and take out”. Thing is, the CPU is in the socket, the sides are surrounded by the socket “walls”, I can’t exactly grab the sides.
I mean, kinda same thing for putting CPU in, but for putting it in, I can just let go a bit above, and have it fall down into the socket.
Maybe this motherboard is like that, and other motherboard are different, but I don’t know.
The only thing I can grab is the heatsink (which you apply thermal paste to) on the top, but I can’t get a good grip on it.
I can keep grabbing and pull the CPU to the side on top, but I might bend a few pins doing that.
This is AM5 socket btw.
Edit: I built this PC from parts, I put the CPU in, so I know I have to remove the cooler and pull the lever up.
I have an AM4 CPU, and legitimately suction lifted the CPU out of the socket entirely on accident. I was changing heatsinks, and the CPU came with the darn thing. I had to pry it off with a knife.
That happens sometimes with AM4. For anyone else reading this: just twist/slide parts to break the adhesion. Trying to pry a CPU off sounds like a recipe for disaster.
Tried twisting first. Didn’t work lol. It was very stubborn. I’m still using the CPU rn so it ended fine.
To add to this tip, run the system for a bit to heat it up first before shutting it down and doing the twist.