I_Fart_Glitter@lemmy.world to What is this thing?@lemmy.worldEnglish · 7 months agoWhat is this pink railroad tie for?lemmy.worldimagemessage-square24fedilinkarrow-up1115arrow-down11file-textcross-posted to: [email protected]
arrow-up1114arrow-down1imageWhat is this pink railroad tie for?lemmy.worldI_Fart_Glitter@lemmy.world to What is this thing?@lemmy.worldEnglish · 7 months agomessage-square24fedilinkfile-textcross-posted to: [email protected]
minus-squaremarkstos@lemmy.worldlinkfedilinkEnglisharrow-up36arrow-down1·7 months agoIt’s marking the joint between two track segments. Look just above it. On both tracks there’s a series of bolts indicating that two track segments have been bolted together. Not sure why the other joints aren’t marked.
minus-squareperviouslyiner@lemmy.worldlinkfedilinkEnglisharrow-up12·edit-27 months agoif that was an insulated joint for track circuit separation there would be cables attached at each side and the two bolted plates would be aligned?
minus-squareDarkassassin07@lemmy.calinkfedilinkEnglisharrow-up12·7 months agoYou can see 3-4 wires connected on either side of the plates. I’m not sure if those particular plates are insulating connections though. Doesn’t really look like it, but I’m no expert on rail connections.
minus-squareperviouslyiner@lemmy.worldlinkfedilinkEnglisharrow-up4·edit-27 months agogood spot, those wires are smaller than I am used to seeing - so it is a track circuit boundary as well as whatever the pink means.
minus-squarechaogomu@kbin.sociallinkfedilinkarrow-up11·7 months agoRail is most often welded together, not joined like this. So you likely don’t need more than one marking.
It’s marking the joint between two track segments. Look just above it. On both tracks there’s a series of bolts indicating that two track segments have been bolted together.
Not sure why the other joints aren’t marked.
if that was an insulated joint for track circuit separation there would be cables attached at each side and the two bolted plates would be aligned?
You can see 3-4 wires connected on either side of the plates.
I’m not sure if those particular plates are insulating connections though. Doesn’t really look like it, but I’m no expert on rail connections.
good spot, those wires are smaller than I am used to seeing - so it is a track circuit boundary as well as whatever the pink means.
Rail is most often welded together, not joined like this.
So you likely don’t need more than one marking.