I’m using mikrotik as my main router with ip 10.0.10.254
And I got a new desktop and turned it into proxmox server with ip 10.0.10.253
And installed adguard home to be my local dns server with ip of 10.0.10.250 and changed how it resolve hostnames by using 1.1.1.1 & 8.8.8.8
I also have another adguard server vm hosted on cloud with ip 190.190.190.200 for example
Configured mikrotik to use adguard as my primary dns server & cloud as secondary in (ip>dns)
But it only resolves hostnames when Allow remote requests is checked, when i uncheck it & remove my cloud dns vm it doesn’t resolve anything
Also in adguard quiery log the only client ip is my miktotik 10.0.10.254 it should be my local devices ip
What could be wrong?
You must log in or register to comment.
This problem is presented in a confusing way. Pro tip: Spending the time to ask a well-organized question with all of the pertinent details sometimes gives you the answer before you ask. That said…
Okay, let’s see if I have this right: You have a local network with a Mikrotik router as the gateway to the Internet, two Adguard DNS caching servers (one on the local network and one on the Internet), and a Proxmox server on the local network. The Adguard servers are pointed to 1.1.1.1 and 8.8.8.8, the DNS caching server in the Mikrotik router is pointed to the Adguard servers, and the Proxmox server is pointed to… what?
It sounds like—and this is just a guess—that the Proxmox server is getting its network configuration from the router via DHCP, which then points it at the router’s internal DNS caching server. DNS queries go: Proxmox -> Mikrotik -> Adguard -> Google. When you turn off the router’s DNS server (by unchecking “Allow remote requests”), the Proxmox server can’t resolve any DNS queries for obvious reasons. (The DNS server it uses has been turned off!)
Everything works fine with the router’s DNS caching server turned on, but if for some reason you want to turn it off, you need to point your local network devices (i.e. the Proxmox server) at a different DNS server. You usually do that by changing the DHCP settings on the router, so it sends DHCP clients the addresses of the Adguard DNS servers.
What ip are you distributing as the dns server in your dhcp config?
Allow remote requests controls whether the router can be used as a resolver, “remote” means anything other than the router, so if the clients are querying the router, this is expected behavior.