I recently found a box in storage that contains about 10 Philips Hue bulbs; I had completely forgotten that I used them in the past. At the time, I had them paired to a Hue bridge. The newest is probably at least 6 years old, maybe a bit more.
I now have a Zigbee network with HA, and so I figure I might as well use the bulbs; they all still work. I can’t figure out how to reset them so I can pair them to my Zigbee controller, though. Every article I read assumes that they’re already connected to a bridge, to Amazon Alexa, I have a Hue dimmer controller, or something of the sort.
Is my only option to sign up for a Hue account, set up my old bridge, and reset them through the Hue app? Surely there must be some other way. I found a thread on [that other site that isn’t Lemmy] that gives a routine of switching power on/off to cause a factory reset, but it doesn’t work after several tries.
UPDATE: I was never able to find a method that worked without using my old Hue bridge. I ended up connecting the bridge and manually deleting each bulb. I few I had to add and delete again, but after about an hour of work, I was able to pair them all with HA.
Cobbling together data from a couple sources…
Install each bulb, and toggle it on/off five times with the wall switch. Make sure to wait 10 seconds between each toggle. (Edit: like on for ten, then off for a couple seconds, repeat)
Unsure whether there’s any visual feedback once this process is complete - I would assume it may go into some pairing indication mode like a dim/brighten cycle to indicate it’s ready to pair.
That’s a bit different than what I read. I read something like 8 seconds on, 2 seconds off, repeat, repeat. I’ll give your method a try.